Brazilian law forbids the addition of cheese whey in milk. However, adulteration with cheese whey is one of the most applied fraud due to its low cost. The detection of this fraud is the quantification of Caseinomacropeptide (CMP). The CMP is a constituent of the whey that can be used as adulteration marker. Thus, an analytical method capable of identifying CMP by Fourier Transform Infrared Spectra (FTIR) was developed using chemometrics methods. Firstly, we attempted to develop an exploratory analysis model by Hierarchical Grouping Analysis (HCA) and Principal Component Analysis (PCA) that indicated similarity between samples of raw milk and semi-skimmed milk. Moreover, in the PCA scores, it was possible to observe a tendency of separation between samples with different concentrations of CMP. Afterwards, multivariate regression models were used for Partial Least Squares (PLS), Partial Least Square with Interval Synergism (siPLS) and Supporting Machines with Least Squares (LS-SVM) to quantify the adulteration in different types of milk by Cheese serum through the CMP. All the models were then compared to each other and the results of the official method with Liquid Chromatography Tandem mass spectrometry (LCMS/MS) analysis used by the Ministry of Livestock and Supply (MAPA). The model LS-SVM, employing the full spectrum, obtained the best result compared to the other models (PLS and siPLS) to quantify the CMP in the milk samples.

<p>Três métodos são propostos para a quantificação de cloridrato de raloxifeno em sua forma farmacêutica de comprimidos: espectrofotometria no ultravioleta (UV), cromatografia líquida de alta eficiência (HPLC) e eletroforese capilar micelar (MEKC). Estes métodos desenvolvidos e validados demonstraram linearidade, precisão e exatidão. Também foram específicos e robustos. Os métodos HPLC e MEKC foram desenvolvidos para indicar a estabilidade do fármaco e demonstraram ter este atributo. O método UV usou metanol como solvente e comprimento de onda de 284nm, obedecendo a Lei de Lambert-Beer nestas condições. Os parâmetros cromatográficos para o método HPLC foram: coluna NST C18 (250 x 4,6 mm x 5 µm), fase móvel composta de água:acetonitrila:trietilamina (67:33:0,3 v/v), pH 3,5, vazão da fase móvel de 1,0 mL min^-1, volume de injeção de 20 µl, detecção no comprimento de onda de 287 nm e temperatura de análise de 30°C. O método MEKC foi realizado utilizando capilar de sílica fundida (40 cm de comprimento efetivo x 50 µm de diâmetro interno) usando como fase móvel solução tampão borato 35.0 mmol L^-1 e solução de dodecil sulfato de sódio (SDS) 50.0 mmol L^-1 pH 8,8. A temperatura de análise foi de 32 °C, com voltagem aplicada de 25 kV, detecção no comprimento de onda de 280 nm e injeção da amostra realizada a 45 mBar por 4 s em modo hidrodinâmico. Para este método MEKC, foi utilizado diclofenaco de potássio (200.0 µg mL^-1) como padrão interno. Todos os métodos foram analisados estatisticamente e demostraram ser equivalentes para a análise quantitativa de raloxifeno em comprimidos e foram aplicados com sucesso na determinação do fármaco.</p>

<p>Three methods are proposed for the quantitative determination of raloxifene hydrochloride in pharmaceutical dosage form: ultraviolet method (UV) high performance liquid chromatography (HPLC) and micellar capillary electrophoresis (MEKC). These methods were developed and validated and showed good linearity, precision and accuracy. Also they demonstrated to be specific and robust. The HPLC and MEKC methods were tested in regards to be stability indicating methods and they showed to have this attribute. The UV method used methanol as solvent and optimal wavelength at 284 nm, obeying Lambert-Beer law in these conditions. The chromatographic conditions for the HPLC method included: NST column C18 (250 x 4.6 mm x 5 µm), mobile phase water:acetonitrile:triethylamine (67:33:0,3 v/v), pH 3.5, flow rate 1.0 mL min^-1, injection volume 20.0 µl, UV detection 287 nm and analysis temperature 30 °C. The MEKC method was performed on a fused-silica capillary (40 cm effective length x 50 µm i.d.) using as background electrolyte 35.0 mmol L^-1 borate buffer and 50.0 mmol L^-1 anionic detergent sodium dodecyl sulfate (SDS) at pH 8.8. The capillary temperature was 32°C, applied voltage 25 kV, UV detection at 280 nm and injection was perfomed at 45 mBar for 4 s, hydrodimanic mode. In this MEKC method, potassium diclofenac (200.0 µg mL^-1) was used as internal standard. All these methods were statistically analyzed and demonstrated to be equivalent for quantitative analysis of RLX in tablets and were successfully applied for the determination of the drug.</p>

Voriconazole is a novel broad-spectrum antifungal drug, employed in the treatment of invasive fungal infections, and represents an alternative to amphotericin B treatment. The manufacturer recommends that any unused reconstituted product should be stored at 2ºC to 8ºC, for no more than 24 h, but no recommendations about i.v. infusion solutions are given. Previous works have reported on the stability of voriconazole in polyolefin bags and just one in 5% dextrose polyvinyl chloride (PVC) bags, at a 4 mg.mL-1 concentration. In this work, the stability of voriconazole as an i.v. infusion solution in 0.9% sodium chloride and in 5% dextrose, in PVC bags, at 0.5 mg.mL-1, stored at 4 ºC and at room temperature, protected from light, was evaluated. These infusion solutions were analyzed for a 21-day period. Chemical stability was evaluated by HPLC assay. Visual inspection was performed and pH of the solutions was measured. No color change or precipitation in the solutions was observed. The drug content remained above 90% for 11 days in 0.9% sodium chloride and for 9 days in 5% dextrose solutions. The i.v. infusion solutions stored at room temperature were not stable. At room temperature, the voriconazole content dropped down to 88.3 and 86.6%, in 0.9% sodium chloride or 5% dextrose solutions, respectively, two days after admixture. Assays performed at the end of the study suggest the sorption of voriconazole by the PVC bags. The results of this study allow cost-effective batch production in the hospital pharmacy.